When it comes to memory speed, an 1866MHz DDR3 RAM is just slightly faster than the 1600MHz DDR3 RAM and is capable of handling most jobs with ease, including gaming. The short answer is yes, DDR3 1866 RAM is more than adequate for video gaming purposes.
Do you think the 1866 Ram can work with the 1600?
It ought to work. 1866 will only be able to run at 1600, therefore it will be too slow for the latency. Putting in the 1866 and setting its timings to match those on the 1600 is your best bet. Then putting in the 1600.
1600MHz or 1866MHz: which is the superior frequency?
However, in most cases, bigger is better. Of course, but to be clear, low-end 1866 MHz memory may run at slower timings in order to achieve the 1866 MHz speed. On a practical level, this would be slower than RAM running at 1600MHz with more responsive timings.
How fast can I run 1866MHz RAM on 1333MHz?
Yes, that’s correct, it should work. Unless your motherboard supports 1866Mhz, it will run at 1333Mhz.
The speed of a computer can be improved by increasing the amount of RAM.
Faster RAM typically equates to faster processing. Memory delivers data to other components more quickly when you have more RAM. As a result, your computer’s powerful CPU can now communicate with its other components at a rate that is just as quick.
CLR9 and CLR10 memory can I be mixed?
Never mix different RAM speeds, timings, manufacturers, voltages, etc. in a dual-channel system. As a result, dual channel memory is typically sold in PAIRS to ensure compatibility. Even if you’re lucky, it won’t be a long-term solution.
What is the maximum amount of overclocking that 1600mhz RAM can achieve?
A 1600 RAM module can be overclocked to a 2000 RAM module.
Is faster RAM better than more RAM?
It is better to have more RAM than to have faster RAM, even if the latter is more expensive. To save money on your PC’s configuration, you can consider purchasing more RAM at a slower speed rather than fewer, faster modules.
I have a 1333MHz board, can I use 1600MHz RAM on it?
The compatibility of the ram is more dependent on your motherboard than on your processor. The g3258 is likely to work with your motherboard if it supports 1600mHz. Even yet, the CPU’s specifications state that it can only support up to 1333 MHz, thus if you’re using 1600 MHz RAM, it may downclock them to 1333 MHz.
Is it possible to use 1600 MHz ram with a 1066 MHz processor?
A 1066/800 MHz RAM Slot cannot be used to run 1600 MHz RAM. Maybe it won’t work! To upgrade an outdated PC with DDR3 1066/800 MHz RAM slots on its motherboard, you may not be able to obtain new RAM modules with the same frequency. A lower clock frequency for the RAM stick is all that is needed for it to work properly.
DDR3 1600 MHz or DDR3 1866 MHz RAM: which is better?
An 1866 MHz clock cycle of a DDR3 1866 MHz RAM only takes 0.525ns to complete, making it somewhat faster than a 1600 MHz clock cycle. This RAM is well-suited for gaming and other high-intensity workloads. A data transfer rate of 3,727 times per second may be achieved with an 1866 MHz wave. Will this work well in a video game?
What is the benefit of ddr3-1866 to AMD FX?
As long as we stick with the standard DDR3-1600 bandwidth statistics, we can examine how much Sandra’s Memory Bandwidth benchmark improves when the competing module sets are bumped to DDR3-1866. At this time, Gaskill’s modules take the lead, although only by a little margin.
How can I determine the DDR3 memory speed?
DDR3 can be used to test this, and the procedure is as follows: Ns cycle time is 1000 times the memory speed divided by two, or 1000 times the memory speed multiplied by two. The Cycle Time multiplied by the CL yields the time required to read a single word of data (a “word” is a technical term meaning 64 bits).
How can Ivy Bridge’s memory speed be determined?
1000 / (Memory Speed / 2) = Cycle Time in Ns Ns = 1000 / Memory Speed = Bit Time. The Cycle Time multiplied by the CL gives the time it takes to read a single word of data (word is a technical term meaning 64 bits). In order to read eight words, multiply the Cycle Time by the CL and then add seven Bit Time units.
Recommended Readings (Visualr)