Best Motherboard for ddr3 Ram 2021

(Last Updated On: August 15, 2021)

Best Motherboard for ddr3 Ram

0- Introduction

1- ASRock Micro ATX DDR3 1066

2- ASUS Micro ATX DDR3 1600 B85M-G

3- ASRock Micro ATX FM2A68M-DG3+

 

Introduction:

A DDR3 Memory is one of the many types of RAM Memories on the market. Although the acronym DDR3 means “Double Data Rate Three,” these RAM Memories were created and launched on the market for the first time in 2008, in the same way, their structure, function, and capabilities are not very different from their predecessors.

Its composition is simple and consists of 240 terminals with approximate measurements of 133.35 millimeters long and 31.75 millimeters high, the same as the other types of RAM. The memories have the qualities of saving, reading, and even writing data on another temporary like the other RAM Memories. We have compiled some of the best motherboards for ddr3 ram in the article. We suggest you have a look at them and keep exploring your research.

It is important to note that these types of RAM Memories are volatile in their entirety to processes of dynamic synchronization of the data inside them. In addition, the importance of RAM Memory in a computer is very significant since without it is not possible to perform any action on the computer. It is also worth mentioning that a laptop’s DDR3 memory does not have the exact dimensions and qualities designed for a desktop computer. We have compiled some of the best motherboard for ddr3 ram in the article. We suggest you have a look at them and carry on digging.

Upgrading your memory is one of the most accessible and most affordable ways to improve the performance of your system. Upgrading and installing memory is very simple, but be sure to check its compatibility when purchasing memory. The ram must be compatible with the motherboard for proper working.

Typically, each new generation of memory technology has a higher frequency, lower voltage, and lower latency than its predecessors. If your system is designed, for example, for DDR2 technology, then it does not support DDR3 modules. Each type of memory has a different groove (this is important for installation). The motherboard has tabs that fit only a kind of groove, so the motherboard usually only supports one memory technology.

The motherboard occupies a prominent place among them since it is a fundamental part of assembling the equipment. For this reason, you must choose the one that best suits your needs carefully. To give you a hand in this task, we will provide you with the keys to select a motherboard for your PC.

The first thing you have to do before deciding on one model or another is to determine what type of motherboard you need, concerning processor socket and rams. The critical point that you should pay attention to when you buy the motherboard for your PC is the socket.

Moreover, before choosing the motherboard chipset for your computer, you must be very clear about the use you will give the computer. For example, if you are going to configure a Gaming PC, you will have to have a chipset that allows you to install faster RAMs. Further, not all motherboards support the simultaneous installation of two graphics cards or more. For this, the manufacturer must expressly indicate that the motherboard is compatible with SLI (for NVidia cards) or Crossfire (for ATI graphics cards).

In essence, motherboards are the connection center of your computer, so you must make sure that the chosen one has the number and type of connections you need.

We have compiled reviews for a few motherboards suitable for ddr3 ram. Therefore, continue reading below:

 

ASRock Micro ATX DDR3 1066

The Asrock 970M Pro3 motherboard includes everything you need to work on your computer. Realtek controllers make the device reliable, and a standard Gigabit Ethernet port is installed. A unique advantage is six external USB 2.0 ports and two PS/2 connectors for the mouse and keyboard.

This motherboard is compatible with the AMD FX processors, AMD Phenom II, and AMD Athlon II. Thanks to the 4 + 1-phase power system, the board can work with eight-core processors, which is 125W. In addition, four DIMM slots can accommodate a maximum of 32 GB of DDR3-2100 MHz RAM.

ASRock Micro ATX DDR3 1066

In total, it has five expansion slots: two PCI-Express 2.0 x16, one PCI-Express 2.0 x1, and two PCI. Interfaces for connecting drives are represented by six SATA 6 GB / s, for the operation of which the AMD SB950 Southbridge is responsible. The motherboard also has four USB 3.0 ports and twelve USB 2.0 ports, which are equally located both on the rear panel and on the board’s surface. The Realtek ALC892 (7.1-channel Intel HD Audio) and Realtek 8111E (10/100/1000 Mbps) chips are responsible for the sound and network, respectively.

In addition to high-quality hardware components (solid capacitors and chokes with ferrite cores), it also supports several useful technologies:

  • XFast RAM – creating a virtual image from RAM to increase overall system performance;
  • XFast LAN – reducing delays in working with online applications by increasing the priority of these applications;
  • XFast USB – increase the speed of data transfer through USB ports;
  • AXTU – simple and fast overclocking and monitoring of system components.

This motherboard is in an affordable price segment and is easy to install and use. Perfect for budget gaming rigs, fully supporting the full line of AMD FX processors with a robust power system. It is possible to install the most efficient video cards and large memory modules.

All board components are fully protected from possible faults and short circuits – the device is manufactured in full compliance with the Full Spike Protection standard. UEFI stands for Unified Extensible Firmware Interface, an innovative BIOS utility that offers an ergonomic and intuitive interface. Faced with the old BIOS, many functions have been improved with the arrival of UEFI.

Conclusion:

This motherboard is designed to drive the most efficient systems and offer users the best technologies currently available. Enjoy an unprecedented experience with this motherboard supporting 8-Core AMD processors and ddr3 ram. Even when the system is off (in ACPI S5 mode), On/Off Play technology allows users to listen to their audio content from their portable player through PC speakers.

Pros:

Compatible with the AMD FX processors.

Full Spike Protection standard.

Realtek Gigabit LAN chip.

Cons:

Placement of four-pin fan connector.

 

ASUS Micro ATX DDR3 1600 B85M-G

The ASUS B85M-G motherboard offers a compact form factor micro ATX and a relatively affordable price. At the same time, it has support for COM and LPT ports, which are relevant in the office environment, and modern USB 3.0 and SATA 6 Gb/s interfaces.

ASUS 5X Protection – implies the use of the ASUS DIGI + VRM digital power subsystem. In addition, there is a steel interface panel with increased resistance to corrosive processes and microcircuits to protect against electrostatic discharges.

ASUS Micro ATX DDR3 1600 B85M-G

The UASP support has been implemented to speed up the USB 3.0 interface. FanXpert is an intelligent fan management system that effectively cools your computer with minimal noise. AI Suite 3 – proprietary software is supplied with the motherboard, with which you can fine-tune several system parameters without going into the BIOS. GPU Boost is an automatic overclocking technology for the graphics subsystem integrated into the processor.

As for the layout of the onboard elements, all ports and connectors are located in optimal places, so you will not have any problems assembling the system based on the new item. Furthermore, as you can see, the manufacturer made sure that the installed video card does not interfere with the connection and disconnection of RAM modules, equipping the DIMM slots with latches only on one side.

Furthermore, at the reverse side of the novelty, you can pay attention to the standard base plate of the processor socket and the fact that the chipset cooling radiator is fixed on plastic clips. The ports and connectors are located at the bottom of the PCB: a front panel audio connector, S / PDIF Out, COM and LPT connectors, a CMOS jumper, 2 pads for activating additional USB 2.0 interfaces, and a front panel connector. In total, the board supports eight USB 2.0 ports: four internal and four on the interface panel. All of them are implemented by the Intel B85 chipset.

The possibilities of organizing a disk subsystem are represented by four SATA 6 Gb/s ports in yellow and two SATA 3 Gb/s ports in dark brown. All connectors function thanks to a set of system logic. This motherboard has four DIMM slots for installing DDR3 memory modules, which are equipped with latches on one side only for greater convenience. The RAM can work in two-channel mode. In addition, modules operating at frequencies from 1333 to 1600 MHz in nominal mode are supported. The maximum memory capacity can be up to 32 GB, enough for almost any task.

Conclusion:

The ASUS B85M-G motherboard has established itself as a quality solution that will look good in a multimedia home PC or office system. Its key advantages include an improved element base, competent layout of onboard elements, support for a sufficient number of modern high-speed SATA 6 Gb / s and UBS 3.0 interfaces, an exemplary structure of the interface panel, and the implementation of several proprietary technologies.

 Pros:

ASUS 5X Protection design.

SATA 6 Gb/s interfaces.

Offers overclocking capabilities for processors.

Cons:

Inconvenient multichannel connection.

 

ASRock Micro ATX FM2A68M-DG3+

 The ASRock FM2A68M-DG3 + micro ATX motherboard is very versatile. Its quality components and practical functions will allow you to enjoy excellent performance and gain everyday comfort for all your uses (work, entertainment, etc.). However, some motherboard elements are sensitive to voltage variations, and a voltage spike can cause serious system malfunctions. However, this motherboard comes with Full Spike Protection incorporates technologies protecting your motherboard components against voltage peaks.

ASRock Micro ATX FM2A68M-DG3+

It comes with an A-Tuning multifunction software suite with a new interface, many new features, and even improved utilities like XFast RAM, OC Tweaker, and much more supports it. It restarts to UEFI technology allows them to automatically access the UEFI interface the next time the system is booted. It is designed for anyone who needs regular access to the UEFI interface.

In addition, the X-Boost technology unlocks the full power of your processor for overclocking. During startup, you can press the “X” key, and X-Boost will automatically overclock for fast performance.

This motherboard includes everything you need to work with your computer. Realtek controllers make the device reliable, and a standard Gigabit Ethernet port is installed. A significant advantage is a PCI slot for expansion cards, two standard VGA (D-SUB) and DVI connectors for connecting a monitor, and two PS/2 connectors for a mouse and keyboard. These options are most in-demand when used as a home computer or office horse.

This motherboard is in an affordable price segment and is easy to install and use. Perfect for assembling an inexpensive home entertainment center as well as a productive office machine. Some of the salient features are:

  • PCIe 3.0 x16 slot and integrated AMD Radeon ™ R5 / R7 graphics in A-series processors;
  • mATX form factor and AMD A68 chipset;
  • 4-phase power supply system with high-quality capacitors and support for processors up to 100 watts;
  • 2-slots for dual-channel DDR3 memory up to 2400MHz (OS) max. 32 GB;
  • built-in 5.1 HD Realtek ALC662 audio card;
  • the gigabit network card on the PCI-E bus with a Realtek RTL8111GR chip;
  • Four connectors SATA3 6.0 Gb / s with support for RAID, NCQ, and AHCI;

It is the best option for creating the best PC for schoolchildren, students, and the office. It will make your computer several times faster and increase the stability of work. Further, when surfing the Internet, you will not be worried about crashes or delays because the device includes a high-performance LAN chip, which speeds up data processing over the network several times.

Conclusion:

It is equipped with the latest solid-state CMOS transistors that double the lifespan of standard counterparts. In addition, the surge protection function ensures the smooth operation of the device. Furthermore, the proprietary FastBoot technology for fast loading of the operating system guarantees an instant Windows startup: in just one and a half seconds, and everything is ready to work.

Pros:

Full Spike Protection.

SATA3 6.0 GB/s.

UEFI interface.

Cons:

Small in size.

 

Final Verdict:

In a computer, all devices are essential; however, the motherboard is the most critical for functionality. Motherboards provide communication between all computer parts, coordinate their functioning, and guarantee the distribution of energy supplied from the power supply.

 

Recommended Readings (visualrsoftware)

Leave a Reply

Your email address will not be published. Required fields are marked *