Best Motherboard for i3 6th Generation 2021

(Last Updated On: August 9, 2021)

Best Motherboard for i3 6th Generation

Motherboards covered in the Article:

0- Introduction

1- Biostar 198118 Motherboard Tb250-btc

2- Biostar TB360-BTC PRO 2.0

3- ASRock Z490 Aqua

 

Introduction:

To choose the correct motherboard for your core i3 6th generation system processor, you must consider several factors. A motherboard is a multilayer printed circuit board. All computer elements connect with the motherboard like the hard disk, processor (CPU), random access memory (RAM), video card, optical drive, etc. The main task of the motherboard is to unite and ensure the joint work of all computer components. We have compiled the best information about best motherboard for 13 6th generation in the article. We suggest you carry on exploring.

One of the essential characteristics of the “motherboard” is its form factor – the standard that determines its dimensions for a computer, mounting points inside the system unit, location on the surface of the CPU socket, I/O ports, and slots for RAM, etc. When assembling a new computer (or performing computer repairs), you must keep in mind that the case must support the form factor of the selected motherboard.

Moreover, all computer motherboards have a specific chipset to support different processors like i3 6th generation, etc. The chipset is a set of several microcircuits designed to work together and whose main task is to perform a set of specific functions. In computers, the chipset on the motherboard is the glue. It allows the processor, memory subsystems, I / O, and others to work together.

The chipset determines what type of RAM and processor are supported by the “motherboard.” In addition, the data transmission speed over the bus to all computer devices depends on it. As we have already determined, one of the main functions of a motherboard is to combine widgets, or, speaking figuratively, in “building bridges” between them; therefore, the main components of the chipset are called “bridges.” The chipset consists of two “bridges,” each a separate microcircuit and performs its specific task.

The Northbridge is needed to connect the processor and devices that use high-performance buses – RAM and video cards. The frequency of the system bus, the maximum amount of RAM, and its type depend on the Northbridge. Sometimes the Northbridge contains an integrated (onboard) GPU. Whereas Southbridge is required to connect slower devices that do not require high bandwidth – network cards, hard disk, USB, PCI buses, etc., to which additional devices are connected.

The presence of two bridges is a classic chipset design for almost all motherboards. However, some schemes differ from traditional ones. It applies to computers built based on modern processors, which include built-in elements that, to a certain extent, perform the functions of the Northbridge (as a rule, a RAM controller). In this case, there is no Northbridge on the motherboard.

One of the most critical parts of the motherboard is the ROM chip, which is shorted to Southbridge. This microcircuit stores the basic computer control program called the basic input-output system or, more commonly known, BIOS (basic input-output system). The BIOS differs from the operating system and other software in that it is available to the computer without connecting to a hard drive.

BIOS provides the order of interaction of the components of the computer with each other; with specific settings, you can select the source of the computer boot (for example, when installing Windows on a laptop ), increase or decrease the frequency of the processor bus, change the timings of the RAM, disable individual elements of the PC and much more.

Choosing a motherboard for the core i3 6th generation processor is not always an easy task. Many times, we build our computers in parts and choose processors and graphics cards first. When it comes time to choose the motherboard, we may consider cutting features to save the budget and make mistakes.

However, we have reviewed some motherboards for i3 6th generation Intel processors to help you choose the best suit your needs. Therefore, continue reading below:

 

Biostar 198118 Tb250-btc

The Biostar TB250-BTC is one of the best motherboards on the market right now for core i3 6th generation processors, outpacing traditional offerings. It is double the size of the previous model. It has 12 native PCIe slots that can support up to 12 graphics cards.

Biostar 198118 Motherboard Tb250-btc

You can save a lot of money by using one system instead of two for the same performance. For example, to run 12 graphics cards, you need to create two designs with the previous version and require two processors, two SSDs, two memory kits, and two power supplies. However, its design allows 12 graphics cards with a single processor, SSD, and other devices. It will increase mining efficiency by 200% and increase profits with less time and increase productivity levels. It makes mining efficient with impressive fragmentation rates and mining profitability.

There are so many PCIe slots; therefore, the manufacturer has arranged the slots neatly. They have even spaces between them on the motherboard, so there is no risk of a short circuit when removed. It is perfect because professional miners want their mining process to be stable and smooth.

Furthermore, the 12 PCIe slots in this module are native PCIe used in the Intel B250 chipset. Many mining motherboards offer PCIe bridging solutions that allow for more PCIe slots. However, there are potential compatibility and stability issues on these motherboards. TB250-BTC beats them all because all PCIe slots are proprietary.

This motherboard has Deluxe Audio capacitors from Nichicon. Nichicon capacitors offer high-quality sound analysis and amplifier effects, transforming your booth into a live performance. The unique Anti-Surge design provides the best plate protection and prolongs product life. With the latest on-board transient voltage suppressor, you can effectively protect the board circuitry; reduce electrostatic discharge vibration and other overvoltage damage to increase the system’s longevity.

In addition, special circuits detect overvoltage conditions and prevent the propagation of current peaks in real-time. It also actively cuts off excessive voltage to protect your system. With power protection, avoid damage to the motherboard during overclocking or unusual power supply. With thermal protection, avoid burning the motherboard and processor with the increase in temperature.

Conclusion:

Its compact capacitors keep the motherboard and system running smoothly 24 hours a day, seven days a week, bringing tremendous benefits to miners with i3 6th generation processors. Of all the alternatives, the BIOSTAR Encryption Mining motherboard makes it very difficult to choose a suitable material for your mining needs. Yet, it is economical, which significantly increases the return on your investment. We are confident that we can offer the best value for money for most miners.

Pros:

Support up to 12 graphics cards.

Best for Bitcoin mining.

Anti-Surge design.

Cons:

Supports only two NVidia cards.

 

 

Biostar TB360-BTC PRO

The current situation in the world of crypto currency miners, i.e., LHR locks and hindering the mining of crypto currencies, allows motherboard manufacturers to produce advanced technology. Therefore, the Biostar TB360-BTC Pro model in version 2.0 is created, equipping with PCI slots in the 3.0 standard, thanks to which LHR locks cease to apply.

Biostar TB360-BTC PRO 2.0

It has a chipset Intel B360 that supports Intel Core i7, i5, i3, Pentium, and Celeron processor in LGA 1151 socket from 6th to 9th generation. Other peripherals are,

  • Two DDR4-1866 / 2133/2400/2666 RAM slots supporting up to 32 GB.
  • Four SATA 3.0 storage ports.
  • An M.2 connector.
  • Twelve PCIe slots
  • Realtek RTL8111E / RTL8111F Gigabit LAN controller.
  • ALC887 7.1 audio codec.
  • PS /2 sockets.
  • Four USB 3.1 and two USB 2.0.
  • HDMI and D-Sub interfaces.
  • A socket for a network cable.
  • Standard audio connectors.

The PCIe port is complete with a PCIe 3.0 x16 port and eleven 3.0 x1 ports. If you want to occupy them all, you will have to turn to PCIe x1 risers and place your cards on a rack dedicated to mining activity. In addition, its PCIe 3.0 slots support 12 video cards. BIOSTAR breaks the rules to discover even more opportunities and innovations, making you earn more money. Its PCIe 3.0 slots enable direct connection of USB risers, preventing overvoltage and short-circuit issues, making mining more fluid, stable, and safe.

Additionally, it is the best cost-saving solution while maintaining maximum efficiency, particularly for Intel core i3 6th generation processors. It includes a BIOS boot screen that detects PCI-E slots. Its advance BIOS allows detecting the graphic unit state on the POST screen. It will enable potential errors and malfunctions to be seen before starting work. Its unique BIOS settings boost your computer directly into the mining mode. It makes it easy to set up and effectively increases mining efficiency in an automated manner.

It has two 24-pin power connectors for each power supply. It supports two power supplies simultaneously, and there is no need for jumpers, adapters, or any other connectors. The power supplies are plugged directly into the board. It is a moisture-proof motherboard. Its PCBs readily oxidize the moisture via the migration of ions; as a result, CAF (Conductive Anode Filament) occurs. Moisture-proof printed circuit boards meet the requirements of high density and high sealing reliability.

The unique Anti-Surge design provides better protection on the board and extends the life of the product. The latest onboard “voltage transient suppressor” model can effectively protect the circuit board; reduce electrostatic discharge vibration, and other overvoltage damage to increase system longevity.

Conclusion:

This series of Biostar motherboards are dedicated to crypto currency miners and supports a wide range from core i3 to core i7 for 6th, 7th, 8th, and 9th generation processors worldwide. They provide ease of configuration, low failure rate, high efficiency, and attractive price, which means that more and more people are reaching for these boards.

Pros:

Conductive Anode Filament.

Voltage transient suppressor.

Twelve graphic cards support.

Cons:

The cold environment required.

 

ASRock Z490 Aqua

ASRock has expanded its portfolio with the flagship Z490 Aqua motherboard. As the name implies, the novelty is based on the latest Z490 chipset and stands out with a pre-installed water block. The Z490 AQUA is an upscale motherboard for Power Users and hardcore gamers with the Intel Core i3 6th generation processor. It incorporates a liquid cooling system and aluminum heat sinks for exceptional cooling performance.

ASRock Z490 Aqua LGA 1200 Intel Z490

In E-ATX format and equipped with 3 PCI-Express 3.0 x16 ports, it supports up to 10th generation Intel processors on socket 1200 (Comet Lake-S), DDR4 RAM up to 4700 MHz (OC Mode), SATA 6 Gbps, and M.2 disks. Furthermore, a 6 AX Wi-Fi module and a 10 GbE network controller offer formidable network performance in both wired and wireless. On the design side, it has a “water-cooling + aluminum heat sinks” cooling system. It is fully compatible with RGB LED components (Polychrome SYNC and Polychrome RGB technologies).

In addition, the board offers a 16-phase power subsystem, dedicated ESS 9218 DAC, PCIe 4.0 support for two slots for installing video cards, a connector for outputting front USB 3.2 ports, and Wi-Fi 6 support with an external antenna. There are Mini Display Port (x2), Thunderbolt 3 (x2), USB-C 3.2, USB 3.2 (x7), HDMI, SPDIF, audio jacks, and two RJ-45 ports (10 Gbps and 2.5 Gbps).

AQUA Armor cooling system is a little wonder that allows performing processing without a CPU cooling system. The CPU water block offers exceptional cooling performance, regardless of the processor used. Finally, the part dedicated to cooling the chipset and the design based on aluminum heat sinks allows the processor to avoid overheating.

Further, you can design your custom lighting system to achieve a unique look with Polychrome RGB technology. The motherboard has four LED connectors: two RGB LEDs and two addressable LED connectors to connect your LED strips and RGB fans. You can download the Polychrome RGB utility directly and from the ASRock Live Update tool or the APP Shop to configure the backlight.

The AQUA motherboard has full wireless network connectivity. You have an Intel module capable of managing the Dual-Band Wi-Fi to improve the quality of Wi-Fi reception and process smoothly without fear of disconnections. The Z490 Aqua includes a plethora of additional features, as befits a flagship product. For example, an OLED screen on a protective casing can display the voltages on the main power lines and the rotational speed of the fans.

Conclusion:

ASRock Z490 Aqua exclusive a 16-phase power supply system of the processor socket on the market with PCI Express 4.0 ready. The PCI-E 4.0 will support the next generation of Intel Core (Rocket Lake-S) chips.

Pros:

Three PCI-Express 3.0 x16 ports.

16-phase power supply system.

SATA 6 Gbps support.

Cons:

Limited Availability.

 

 

Final Verdict:

The motherboard is one of the core components of your computer; therefore, while selecting a motherboard for your computer, you must consider the performance and compatibility, undoubtedly, as fundamental parameters.

 

Recommended Readings (visualrsoftware)

Leave a Reply

Your email address will not be published. Required fields are marked *